Skip to content
MOBILE HOME
LOGISTIC
Plan your transport

MOBILE HOME LOGISTIC / PRACTICAL GUIDE

Mobile home transport: unit types and preparation

Compare transport preparation for static caravans, mobile homes, chalets, lodges, twin units, expandable homes, apple pods and capsule houses.

Ask the MHL team

The name of the home is a starting point. To plan transport, Mobile Home Logistic needs the configuration that will actually be loaded: a complete unit, separate sections, a closed structure or a packaged module. The same commercial description can refer to different loads.

MHL receives enquiries for road haulage, sea freight and delivery to the receiving site. Each international enquiry depends on the unit, addresses, access, carrier acceptance and documentation. Send the information below for assessment of your move; this guide does not confirm a booking or the suitability of a particular model.

Mobile home, static caravan, stacaravan, chalet or lodge

These descriptions are used in different markets. The name alone does not establish whether the home has a chassis, can be moved on its existing wheels, or needs a platform and specific handling. Describe a chalet or lodge by its construction and transport configuration.

Measure the unit as it will leave the collection site: overall length, width and height, including projections that remain attached. Provide documented weight and photographs of the chassis, underside and access. If weight or chassis condition is unknown, flag the missing information rather than presenting an estimate as a confirmed measurement.

  • Make, model, year and available documentation.
  • External dimensions, weight and structural and chassis photographs.
  • Decking, steps, roof features and other items to remove or retain.
  • Who disconnects utilities, releases the home from its park and prepares collection.

Twin unit: two sections of one home

A twin unit is assessed as a home made up of sections. This differs from an enquiry for two independent mobile homes. Identify each section and provide dimensions and weight for each load, together with the final assembled configuration.

Ask the manufacturer or responsible technical professional for the applicable separation, joint protection, transport and reassembly instructions. Do not assume the home can be separated. The plan should define collection and arrival sequence, handling of each section and who will reassemble the home at its destination.

  • Identification, length, width, height and weight of each section.
  • Available joint drawings, support points and separation instructions.
  • Protection of exposed faces and an inventory of removed items.
  • Responsibility for dismantling, unloading, reassembly and utility connections.

Expandable home: measure the closed configuration

The living area after opening the home is not its transport size. Request the manufacturer’s approved shipping configuration and confirm whether the unit can be closed again. Send drawings and closed or folded dimensions where applicable, including packaging, accessories and projections. A commercial description such as “20 foot” or “40 foot” does not confirm that a load fits inside a shipping container.

The manufacturer should specify how the unit must be prepared, secured, supported and handled for transport. Confirm that moving elements and materials travelling inside are described and secured. Sea freight options are assessed using actual dimensions, weight and loading requirements, rather than the advertised floor area.

  • Drawings and dimensions of the closed home, including packaging.
  • Transport weight and a list of accessories shipped with the unit.
  • Securing, support, lifting and destination opening instructions.
  • Unloading space and responsibility for opening and installation.

Apple pods, pods and capsule houses

“Apple pod”, “pod” and “capsule house” describe different modules. Identify the exact manufacturer and model for transport assessment. Rounded shapes, glazed areas and exterior accessories should appear in the drawings and photographs of the shipping configuration.

Request the manufacturer’s support, protection and lifting instructions. The team assesses the packaged module and the proposed delivery, including access for the transport vehicle and unloading equipment. Commercial names do not determine customs classification or establish acceptance by a vessel, vehicle or terminal.

  • Manufacturer, model and drawings of the shipping configuration.
  • Actual length, width, height, weight and packaging.
  • Glazing protection, projections, support points and lifting instructions.
  • Prepared unloading area and the agreed scope of placement.

Prepare your unit details

Complete a brief for a unit or the two sections of a twin unit. Save it to confirm measurements, shipping configuration and access before requesting a quotation.

LWH

L: Length (m) · W: Width (m) · H: Height (m)

Illustration only. Measure the load in its transport configuration, including projections and packaging. This does not specify lifting points, capacity or approval.
Prepare a transport brief

This guide explains planning considerations. The transport plan, carrier acceptance and applicable requirements need confirmation for your unit and destination before booking.

Frequently asked questions

Can MHL assess a type of home not listed in this guide?

Yes. Send the manufacturer, model, shipping configuration, dimensions, weight, photographs and both addresses. The team checks the enquiry with the relevant parties before confirming the solution, scope and availability.

Can two 8-metre homes travel on one trailer?

Nominal length does not confirm that loading arrangement. Each home’s dimensions and weight, load distribution, available trailer, route and access need assessment. The quotation should identify the accepted configuration.

Can an expandable home travel in a shipping container?

This depends on dimensions and weight when closed and packaged, loading access and equipment requirements. Send the shipping drawing; the commercial name of the home does not establish compatibility with a container.

Does twin-unit delivery include reassembly?

Only if that work is expressly included in the quotation. Separate transport and unloading from joining the sections, finishing, foundations and utility connections, identifying the party responsible for each task.

What if I do not know the weight or lifting points?

Flag the missing information and request documentation from the manufacturer or responsible technical professional. Transport and handling need adequate load information; a photograph or external size does not replace that confirmation.

Can these unit types be shipped to any country?

The destination is assessed for each enquiry. Available transport, load acceptance, documents and import requirements must be confirmed. Permission to install or occupy the home on the site is separate from transport.

What to send for a transport quotation

Ask the MHL team

Moving a static caravan in the UK ↗

Related guides

Explore transport corridors

Prepared by: Mobile Home Logistic · Content reviewed: